HUNAN EDEG MACHINERY CO.,LTD

Products
2Y-20E Wheel Type CPT Machine
Product Specifications

2Y-20EWheel Type CPT Machine

CPT machine uses hydraulic rams to push the CPT probe into the soilground in even speed. The resistance of the cone probe penetrating soil,producing the changes of the electric resistance into the signals of quantityof electric charge, which is sent to the computer to record, analyze and giveout the geotechnical engineering properties of soil and delineating soil stratigraphy. It is used in soft soil,adhesive soil, clay, sandy soil etc.

2Y-20Ehydraulic crawler has good features of the similar products in the market. Ithas compact structure, small size, large power and:

1. Can drive the machine towork in tough conditions, fast moving and labor saving.

2. Advanced hydraulicsystem, compact structure, small size, easy to install, small loss to thepressure etc.
3. Use sliding hydraulic anchoring system, big torque hydraulic motor to rotatethe anchor legs into the ground. When doing CPT, the anchoring system can slideout the vehicle, and slide back after finish CPT work.
4. The machine is multiple purpose, it is not only an ideal equipment for CPT,but also can be used for CPTU, PMT, DMT, VCT, WVT testings(correspondingaccessories are required)



Walking   Structure

Walking   Method

4-wheels   driving

Driving   Model

Rear   wheels drive

Turning   Radius

4m

Walking   Speed

25-40   km/h

Engine   Power

Diesel,   22HP

Engine   Speed

2200-2600   rpm

Hydraulic   System

Oil   Pump

Model

CB-Fc315-FL-YZ

Rated   Speed

2000   rpm

Displacement

60   L/min

Pressure

16   Mpa

Multiple   Unit Valve

Model

DL15CF.50WC.C

Supporting   Legs

Hydraulic Cylinder   Ram Diameter

90mm

Stroke

450mm

Bearing   Capacity(single cylinder ram)

60   KN

Lifting Force(single   cylinder ram)

40   KN

CPT   Apparatus

Type

2Y-20(Ajustable)

Rated Thrust Force

200-250   KN

Lifting Force

240-300   KN

Penetration Speed

1.2±0.3   m/min

System Oil Pressure

14   Mpa

Anchoring   System

Anchoring Motor max   Torque

2442   N.m

Anchoring Type

Multiple   anchors

Anchor Diameter

≥350   mm

Probe   Pipe

Material:   High Strength Steel Alloy 45MnMoB

Diameter:   Φ36. Φ40Φ42(Optional)

Temperature

Ambient   Temperature Maximum

40

Ambient   Temperature Minimum

-20

Engine   Water Temperature

90

Hydraulic   Oil Temperature

65

Dimension

3300*1800*1500mm

Weight

3500kgs