HUNAN EDEG MACHINERY CO.,LTD

Products
2Y-25/5 F Crawler Type CPT Machine
Product Specifications

CPTmachine uses hydraulic rams to push the CPT probe into the soil ground in evenspeed. The resistance of the cone probe penetrating soil, producing the changesof the electric resistance into the signals of quantity of electric charge,which is sent to the computer on the ground to record, analyze and give out the geotechnical engineering propertiesof soil and delineating soil stratigraphy. It isused in soft soil, adhesive soil, clay, sandy soil etc.

2Y-25F-5hydraulic crawler has good features of the similar products in the market. Ithas compact structure, small size, large power and:

1. Use the crawler tosupport and move, can work in tough working environment such as beach, river bank,sand lands, paddy fields etc., and can walk on the icy roads.
2. Advanced hydraulic system, compact structure, small size, easy to install,small loss to the pressure etc.

3. Use sliding hydraulicanchoring system, big torque hydraulic motor to rotate the anchor legs into theground. When doing CPT, the anchoring system can slide out the vehicle, andslide back after finish CPT work.

4. For shallow depth CPTtest, no need to do anchoring, just use the small CPT machine on the vehicle.

5. This machine can liftitself up by their hydraulic ram legs, can be easily to load on/offtransportation vehicles.
6. The machine is multiple purpose, it is not only an ideal equipment for CPT,but also can be used for CPTU, PMT, DMT, VCT, WVT testings(corresponding accessoriesare required)

Walking   Speed

10-30   km/h

Gradeability

≤30°

Track   Type

Rubber

Track   Width

350mm

Track   Pitch

82P

Track   Tooth Qty

55Z

Engine   Power

Diesel,   22KW

Engine   Speed

2000-2500   rpm

Hydraulic   System

Oil   Pump

Model

CB-Fc315-FL-YZ

Rated   Speed

2000   rpm

Displacement

60   L/min

Pressure

16   Mpa

Multiple   Unit Valve

Model

DL15CF.50WC.C

Supporting   Legs

Hydraulic Cylinder   Ram Diameter

90mm

Stroke

450mm

Bearing   Capacity(single cylinder ram)

60   KN

Lifting Force(single   cylinder ram)

40   KN

CPT   Apparatus

Type

2Y-25   or 2Y-5

Rated Thrust Force

250KN   or 50KN

Lifting Force

300KN   or 60KN

Penetration Speed

1.2±0.3   m/min

System Oil Pressure

10   Mpa

Anchoring   System

Anchoring Motor max   Torque

2442   N.m

Anchoring Type

Multiple   anchors

Anchor Diameter

≥350   mm

Probe   Pipe

Material:   High Strength Steel Alloy 45MnMoB

Diameter:   Φ36. Φ40Φ42(Optional)

Temperature

Ambient   Temperature Maximum

40

Ambient   Temperature Minimum

-20

Engine   Water Temperature

90

Hydraulic   Oil Temperature

65

Dimension

3300*1750*1800mm

Weight

3800kgs