HUNAN EDEG MACHINERY CO.,LTD

Products
2Y-20E Crawler type CPT machine
Product Specifications

2Y-20E Crawler type CPT machine

CPT machine uses hydraulicrams to push the CPT probe into the soil ground in even speed. The resistanceof the cone probe penetrating soil, producing the changes of the electricresistance into the signals of quantity of electric charge, which is sent to thecomputer on the ground   to record,analyze and give out the geotechnical engineering properties of soil and delineatingsoil stratigraphy. It is used in soft soil, adhesive soil, clay,sandy soil etc.


2Y-20Ehydraulic crawler has good features of the similar products in the market. Ithas compact structure, small size, large power and:

1. Use the crawler to support and move, can work in tough workingenvironment such as beach, river bank, sand lands, paddy fields etc., and canwalk on the icy roads.

2. Advanced hydraulic system, compact structure, small size, easy toinstall, small loss to the pressure etc.

3. Use sliding hydraulic anchoring system, big torque hydraulic motorto rotate the anchor legs into the ground. When doing CPT, the anchoring systemcan slide out the vehicle, and slide back after finish CPT work.

4. The machine is multiplepurpose, it is not only an ideal equipment for CPT, but also can be used forCPTU, PMT, DMT, VCT, WVT testings(corresponding accessories are required)

Engine   Power

Diesel,   22KW

Engine   Speed

2000-2500   rpm

Walking   Speed

10-30   km/h

Gradeability

≤30°

Track   Type

Rubber

Track   Width

350mm

Track   Pitch

82P

Track   Tooth Qty

55Z

Hydraulic   System

Oil   Pump

Model

CB-Fc315-FL-YZ

Rated   Speed

2000   rpm

Pressure

16   Mpa

Multiple   Unit Valve

Model

DL15CF.50WC.C

CPT   Apparatus

Type

2Y-20(Ajustable)

Rated Thrust Force

200-250   KN

Lifting Force

240-300   KN

Penetration Speed

1.2±0.3   m/min

System Oil Pressure

16   Mpa

Anchoring   System

Anchoring Motor max   Torque

2442   N.m

Anchoring Type

Multiple   anchors

Anchor Diameter

≥300   mm

Probe   Pipe

Material:   High Strength Steel Alloy 45MnMoB

Diameter:   Φ36. Φ40Φ42(Optional)

Temperature

Ambient   Temperature Maximum

40

Ambient   Temperature Minimum

-20

Engine   Water Temperature

90

Hydraulic   Oil Temperature

65

Dimension

3500*1800*1800mm

Weight

3200kgs